
Bitumen 40/50 is another type/grade of bitumen we can provide our clients.
The bitumen is provided during the process of oxidation of vacuum bottom in bitumen production units, Due to its high air blowing and penetration, is used in tropical areas. Below is the product's specification table which will be documented and certified by SGS or any third party inspection company the client wishes
Analysis | Unit | Limit | Test Method |
Density @ 25 °C | Kg/m³ | 1010 - 1060 | D70 or D3289 |
Penetration @ 25 °C | mm/10 | 40/50 | D5 |
Softening point °C | °C | 52/60 | D36 |
Ductility @ 25 °C | cm | 100 min | D113 |
Loss on Heating | wt% | 0.2 max | D6 |
Drop in Penetration after Heating | % | 20 max | D5 |
Flash point | °C | 232 min | D92 |
Solubility in Trichloroethylene | wt% | 99.0 min | D2042 |
Spot test | - | Negative | A.A.S.H.O.T 102 |
Viscosity @60 °C | P | 4000 +- 800 | D2171 |
Viscosity @135 °C | cSt | 400 min | D2170 |
Test on residue From thin film Oven Test (ASTM D1754) | |||
Retained Peneteration after TFOT | % | 58 min | D5 |
Ductility 25 °C 5 cm/min, afer TFOT | cm | 50 | D113 |
Viscosity @60 °C | P | 20000 max | D2171 |